Social distancing procedures are in place on-site, however as we have an outdoor display we will not be enforcing a mask policy for visitors.
Please call before visiting if you have any concerns - 01733 810161

Primethorpe Colour Enhancer Sealer - Natural Stone Protector - 5L

Availability: In stock

Excl. VAT: £67.50 Incl. VAT: £81.00
Primethorpe Colour Enhancer Sealer - Natural Stone Protector - 5L is available for purchase in increments of 1

Primethorpe Paving Colour Enhancing Sealer brings out the colours in your natural stone whilst protecting it against the elements.

The Product: One tin of Primethorpe Paving Ultra HD Colour Enhancing natural stone sealer. 1 QTY purchased is 1 tin.

The Size: This is a single 5L tin.

The Coverage: You get approximately 20m2 coverage per 5L tin.

The Colour: This sealer darkens the stone and really brings out any natural colour.

Availability: In stock

Excl. VAT: £67.50 Incl. VAT: £81.00


Product Descriptions

Primethorpe Paving have manufactued our own high quality, solvent based, impregnating sealer. We were fed up of the overcharging and overpaying for branded natural stone sealer, so we went out and made our own!

This sealer is made to match and beat the market leaders, so we know you'll be happy.

This is a one coat sealer - one of the only of its kind on the market. A single coat is enough to enhance the colour to a matte finish and protect the stone against fade and stains.

A second coat will give your paving a gloss finish.

A third coat will result in a permanent wet-look effect for your patio. 

The sealer itself will cover around 20mper 5L tin for a single coat. For the second coat, you are only likely to use half the amount if you wanted a gloss effect.


Firstly, you can check that our stone needs sealing by putting several drops of water onto the surface. Leave for 10 minutes and if the water is absorbed into the stone, then it shows the stone will absorb moisture in the future and requires sealing. If necessary, clean the surface with a stone floor cleaner, rinse and allow to dry thoroughly before applying the sealer.


Shake well before use. Apply the Colour Enhancer Stone Floor Sealer using a brush or lint-free cotton cloth and allow the sealer to penetrate for 10 minutes. Remove excess with a clean lint-free cotton cloth and allow to dry for a minimum of 8 hours.

To check the surface is properly sealed, drop a small amount of water onto the surface. Leave for 10-15 minutes and if water remains on the surface then enough sealer has been applied. If not, then further coats of sealer are required. The more coats of sealer applied to the stone, the darker the stone will look.

Several coats may need to be applied quickly on very porous surfaces. The number of coats required will depend on the porosity of the stone.

Oil finishes bring out the natural colours of stone. A wet surface will be an indication if the final colour. Always test product on a spare surface or inconspicuous area for colour compatibility and end result.

Cleaning & Maintenance

To protectand condition your floor, there are many product to help with regular maintenance of the finish.


Oily cloths may self combust. Do not leave impregnated cloths in bundles. Before discarding, lay them flat to dry outside to avoid fire hazard. This product may dissolve bitumen based adhesives.


Available 5L containers.

Additional Information

Free Delivery Yes
Edge Type No
Material No
Size No
Surface Finish No
Thickness No
Pack size No