ProJoint Ultimate Paving Cleaner – Professional Strength Concentrate – 5L

ProJoint Ultimate Paving Cleaner – Professional Strength Concentrate – 5L

ProJoint Ultimate Paving Cleaner is a professional-strength concentrated cleaner designed to tackle stubborn dirt and staining on patios, driveways, paths and other hard landscaping surfaces. Its powerful non-acid formulation makes it ideal for deep cleaning natural stone and concrete paving without relying on an acid-based cleaner.

Designed to tackle oil, grease, rubber marks, general dirt, algae, mould and mildew, the concentrated formula can be diluted for general cleaning or used at a stronger concentration on heavily soiled areas. The 5 litre container can make approximately 55 litres of cleaning solution when diluted at 1:10.

Professional-Strength Paving Cleaner

Ideal for restoring tired and dirty paving, ProJoint Ultimate Paving Cleaner penetrates and loosens stubborn contamination before the surface is agitated and thoroughly rinsed. It can be applied using a sprayer, watering can or brush and is also suitable for use alongside a pressure washer.

What Does It Remove?

• ✓ Oil and grease
• ✓ General dirt and grime
• ✓ Rubber and tyre marks
• ✓ Algae
• ✓ Mould and mildew
• ✓ Stubborn outdoor staining

Main Benefits

• ✓ Professional-strength concentrated paving cleaner
• ✓ Non-acid based formulation
• ✓ Ideal for natural stone and concrete paving
• ✓ Tackles stubborn stains and heavy soiling
• ✓ Suitable for patios, paths and driveways
• ✓ Suitable for use with pressure washers
• ✓ Adjustable dilution depending on the level of contamination
• ✓ 5L concentrate provides excellent coverage

Dilution & Coverage

For general cleaning, dilute 1 part ProJoint Ultimate Paving Cleaner with 10 parts warm water. A 5 litre container therefore makes approximately 55 litres of diluted cleaning solution.

• • General Cleaning Dilution: 1:10 with warm water
• • 5L Concentrate: Makes approximately 55 litres of cleaning solution
• • Approximate Coverage: 5m² per litre of diluted solution
• • Potential Coverage at 1:10 Dilution: Up to approximately 275m²

For particularly stubborn staining, a stronger solution may be required. Coverage will vary depending on the condition, texture and porosity of the paving and the concentration used.

How to Use

1. Dilute – for general cleaning, mix 1 part cleaner with 10 parts warm water. Use a stronger concentration where required for stubborn contamination.
2. Apply – distribute the solution evenly across the paving using a suitable sprayer, watering can or brush.
3. Allow to Work – leave the cleaner on the surface for approximately 15–20 minutes. Do not allow the solution to dry out.
4. Agitate – scrub stubborn or heavily contaminated areas with a suitable stiff brush where required.
5. Rinse – thoroughly rinse the surface with clean water or use a suitable pressure washer.

Ideal Uses

• ✓ Natural stone paving
• ✓ Concrete paving
• ✓ Patios and terraces
• ✓ Driveways
• ✓ Garden paths and walkways
• ✓ Heavily soiled outdoor paving
• ✓ Preparation before applying a compatible paving sealer